Headlight Beam Leveler Switch
WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
Connect the circuit tester to the battery and headlight beam leveler switch connector. Measure the voltage at each switch position.
TERMINALS RESISTANCE CHART
| Switch position | Terminal No. | Standard |
|---|---|---|
| 0 | 6, 7 (+) and battery (-) | 77 - 83% of battery voltage |
| 1 | 65 - 71% of battery voltage | |
| 2 | 53 - 59% of battery voltage | |
| 3 | 41 - 47% of battery voltage | |
| 4 | 29 - 35% of battery voltage | |
| 5 | 17 - 23% of battery voltage |