LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Lighting System) >> Side Turn Signal Light Assembly >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Side Turn Signal Light Assembly: Removal

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the mirror. Refer to REPLACEMENT , Outer Mirror.
  3. Remove the scalp cap. Refer to REPLACEMENT , Scalp Cap.
  4. Remove the 2 mounting screws, disconnect the harness connector and then remove the side turn signal light assembly.
    Fig 1: Locating Side Turn Signal Light Assembly Mounting Screws
    G05671877Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals