Rear Hub Unit Bearing

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.

Remove the four bolts from the rear housing, and remove the rear hub unit bearing.

Fig 1: Locating Rear Housing Mounting Bolts
Courtesy of SUBARU OF AMERICA, INC.
CAUTION:
- Be careful not to damage the magnetic encoder.
- Do not get closer the tool which charged magnetism to magnetic encoder.
  
  Fig 2: Identifying Magnetic Encoder And Rear Hub Unit Bearing
  Courtesy of SUBARU OF AMERICA, INC.
Remove the two bolts from the rear housing, and remove the back plate.

Fig 3: Locating Rear Housing Mounting Bolts
Courtesy of SUBARU OF AMERICA, INC.