LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Drivetrain System) >> Rear Hub Unit Bearing >> Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rear Hub Unit Bearing: Assembly

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
  1. Attach the hub to the ST securely.

    ST 28099PA080 HUB STAND

    Fig 1: Identifying Rear Hub Unit Bearing And Hub Stand
    G06343471Courtesy of SUBARU OF AMERICA, INC.
  2. Using a press, press the new hub bolts until their seating surfaces contact the hub.
    NOTE: Use the 12 mm (0.47 in) dia. holes in the HUB STAND to prevent bolts from tilting.
scientia non olet · About LEMON Manuals