LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> General Information >> OBD-II Drive Cycles >> Drive Cycles >> Drive Cycle J >> Diagnostic Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Procedure

  1. Idle the engine for 15 minutes or more.
  2. Turn the ignition switch to OFF.
  3. After 6 hours passed from the start of step 2), read the temporary code using the Subaru Select Monitor.