Front Suspension: Cradle: Installation
- Install each part in the reverse order of removal.CAUTION:
- Use a new bolt and self-locking nut. For parts which are not reusable, refer to "COMPONENT". Refer to , COMPONENT , General Description.
- Perform installation of the universal joint when the tilt position of the steering column is at the lowest position.
- Tighten the bolts of the universal joint in the order of gearbox side and column shaft side.
- Be sure to follow the tightening order and tightening torque of universal joint to avoid the steering effort from becoming heavy.
NOTE: Replace the gasket of the throttle body with a new gasket.Tightening torque:
Front suspension-related parts: Refer to , COMPONENT , General Description.
Steering gearbox-related parts: Refer to STEERING GEARBOX .
- Inspect the wheel alignment and adjust if necessary.