Body Control Module: Service and Repair

Body Integrated Unit

REMOVAL
1. Disconnect the ground cable from battery.
2. Remove the instrument panel lower cover.
3. Remove the body integrated unit.

CAUTION: Be careful to keep water and other foreign materials away from body integrated unit.

1. Remove the harness clip and connector.
2. Remove the bolts, and remove the body integrated unit.






INSTALLATION
Install each part in the reverse order of removal.

Tightening torque:
Body integrated unit: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)

NOTE: Make sure that there are no differences from the contents of the current settings after installation.