RH Side

Remove the collector cover.
NOTE: Follow the steps below when removing the collector cover.
1. Pull up the two points at the rear (A).
2. Pull up the two points at the front (B) while moving them forward.
  
  Fig 1: Removing Collector Cover
  Courtesy of SUBARU OF AMERICA, INC.
Release the fuel pressure. Refer to , RELEASING OF FUEL PRESSURE , PROCEDURE, Fuel.
Disconnect the ground cable from battery.
Open the fuel filler lid and remove the fuel filler cap.
Remove the air cleaner case and air intake boot assembly. Refer to AIR CLEANER CASE . Refer to AIR INTAKE BOOT .
Remove the fuel pipe protector RH.

Fig 2: Locating Fuel Pipe Protector RH Bolts
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector from fuel injector.
Remove the bolt which holds fuel injector pipe onto cylinder head.

Fig 3: Locating Fuel Injector Pipe RH Bolts
Courtesy of SUBARU OF AMERICA, INC.
Remove the fuel injector while lifting up the fuel injector pipe.