LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback R >> Repair and Diagnosis >> Maintenance >> Procedures >> General Information >> Pre-delivery Inspection >> Pre-Delivery Inspection (PDI) Procedure >> Immobilizer System
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Immobilizer System

  1. Check that the engine starts with all keys that are equipped on vehicle.
  2. 60 seconds after turning ignition switch from ON to ACC or OFF, or immediately after removing the key, check that the security indicator light is blinking.
  3. For the model for Canada, execute Each System Check > Integ. unit mode > "SCU collation mode" on SSMIII to check [Collation OK (no error)] is displayed.
    NOTE: If malfunctions occur, refer to "IMMOBILIZER (DIAGNOSIS)".
scientia non olet · About LEMON Manuals