Drive Pinion Shaft Assembly: Removal
- Remove the transmission assembly from the vehicle. Refer to
, REMOVAL , Automatic Transmission Assembly.
- Pull out the torque converter assembly. Refer to
, REMOVAL , Torque Converter Assembly.
- Remove the transmission harness connector from stay.
- Remove the ATF cooler inlet pipe and outlet pipe. Refer to
, REMOVAL , ATF Cooler Pipe and Hose.
- Separate the converter case and transmission case. Refer to
, REMOVAL , Converter Case.
- Remove the drive pinion shaft mounting bolts, and then remove the drive pinion shaft assembly from oil pump cover.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the oil pump cover from AT main case. Refer to
, OIL PUMP COVER .