LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Turbine Speed Sensor 1 >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Turbine Speed Sensor 1: Installation

  1. Install the turbine speed sensor 1.

    Tightening torque: 

    7 N.m (0.7 kgf-m, 5.2 ft-lb) 

  2. Connect the turbine speed sensor 1 connector.
    Fig 1: Identifying Turbine Speed Sensor 1 Connector
    G06652012Courtesy of SUBARU OF AMERICA, INC.
  3. Install the front exhaust pipe. Refer to FRONT EXHAUST PIPE .
  4. Lower the vehicle.
  5. Connect the ground cable to battery.
scientia non olet · About LEMON Manuals