LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Tribeca Limited >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - Diagnostics >> Subaru Select Monitor >> Operation >> Clear Memory Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Clear Memory Mode

  1. Shift the select lever to "P" range.
  2. On the «Main Menu» display screen, select the {Each System Check}.
  3. On the «System Selection Menu», select {Transmission Control System}.
  4. After transmission type information pops up, select [OK].
  5. On the «Transmission Diagnosis» display screen, select {Clearing Memory}.
  6. When "Done. Turn ignition switch to OFF" pops up, select [OK].
  7. Turn the Subaru Select Monitor and ignition switch to OFF. To turn the ignition switch to ON again, wait for more than 10 seconds.
    NOTE:
    • To clear the previous DTC, use {Clearing Memory}, and to clear the learned value, use {Clear Memories 2}.
    • For details concerning the operation procedure, refer to SUBARU SELECT MONITOR .
scientia non olet · About LEMON Manuals