LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Tribeca Limited >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Front Differential Assembly >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Differential Assembly: Removal

  1. Remove the transmission assembly from vehicle body. Refer to REMOVAL , Automatic Transmission Assembly.
  2. Pull out the torque converter assembly. Refer to REMOVAL , Torque Converter Assembly.
  3. Remove the transmission harness connector from stay.
  4. Remove the oil charge pipe. Refer to REMOVAL , Oil Charge Pipe.
  5. Remove the ATF inlet and outlet pipes. Refer to REMOVAL , ATF Cooler Pipe and Hose.
  6. Separate the converter case from the transmission case. Refer to REMOVAL , Converter Case.
  7. Remove the differential side retainers using ST.
    NOTE: Hold the differential case assembly by hand to avoid damaging the retainer mounting hole of the converter case.

    ST 18630AA010 WRENCH COMPL RETAINER

  8. Remove the differential assembly while being careful not to damage the attachment part of retainer.
scientia non olet · About LEMON Manuals