Rearview Mirror (RCD Model): Adjustment: Calibration
- Before performing calibration, check the following items.
- There is a sufficient distance from a big metal object or a building.
- Vehicle is parked on a level surface.
- The switch of unnecessary accessories (defogger, A/C system and light) is turned off.
- All doors are closed.
- Turn the ignition switch to "ON".
- Hold down the multi-function button for nine to twelve seconds, and change the mode to the calibration mode. "C" is displayed on the screen.
- Drive the vehicle in a circle until the display of "C" goes off. (Approx. two or three times)
- Calibration is completed.
- The mirror may not be able to perform the reading correctly. You can see this phenomenon only when the compass operates only to the specific direction. If you encountered this situation, go back to step 1 to perform adjustment again.