LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Tribeca Touring >> Repair and Diagnosis >> Maintenance >> Procedures >> General Information >> Pre-delivery Inspection >> Pre-Delivery Inspection (PDI) Procedure >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pre-Delivery Inspection (PDI) Procedure: Notes

Static Checks Just After Vehicle Receipt 

Operation Check point
1. Appearance
  1. If the vehicle is covered with protective coating, visually check the vehicle body for damage and dents. If the protective coating has been removed, visually check the body painted area for damage or stains in detail.
  2. Visually check the glass and light lenses for any damage, cracks or excessive gaps between body sheet metal.
  3. Visually check the plated parts for any damage.
2. Tire
  1. Check the tires for damage, defective, and dents on wheels.
  2. Check the tire air pressure.
3. Fuse installation If the vehicle is about to be delivered to customer, attach a back-up fuse.
4. Door lock/unlock and open/close operations
  1. Using the key, check the door can be locked or unlocked normally.
  2. Open and close all doors to check that there are no defective.
  3. Operate the power door lock switch to check that the door (rear gate) is locked and unlocked normally.
5. Child safety lock system Check the child safety lock system operates normally.
6. Rear gate lock/unlock and open/close operation
  1. Check if the rear gate can be unlocked normally through the emergency hole.
  2. Open and close the rear gate to see that there are no problems.
7. Fuel lid opener lock release lever Operate the fuel lid opener to check that the fuel filler lid can be unlocked normally.
8. Accessory Check that the following accessories are provided.
  • Owner's manual
  • Warranty booklet
  • Maintenance note
  • Spare key
  • Security ID plate
  • Key No. plate
  • Jack
  • Tool set
  • Spare tire
9. Front hood lock release system Operate the front hood lock release lever to check that the front hood is unlocked normally.
10. Battery Check the battery terminals for any abnormal conditions such as rust and trace of battery fluid leaks.
11. Brake fluid Check that the fluid level is normal.
12. Engine oil Check that the oil level is normal.
13. AT front differential gear oil Check for leakage of AT front differential gear oil.
14. Engine coolant Check that the engine coolant level is normal.
15. Window washer fluid Check that the window washer fluid level is normal.
16. Front hood latch Check that the front hood is closed and locked normally.
17. Keyless entry system Check that the keyless entry system operates normally.
18. Alarm system Check that the alarm system operates normally.
19. Seat
  1. Check the seat surfaces for stains or dirt.
  2. Check the seat installation conditions and functionality.
  3. Check that the occupant detection system for passenger's seat operates normally.
20. Seat belt
  1. Check the seat belt installation conditions and functionality.
  2. Check the seat belt warning system operates normally.

Checks with the Engine Running 

Operation Check point
21. Delivery (test) mode connector Turn the ignition switch to ON and check that the malfunction indicator light starts blinking.
22. Immobilizer system
  1. Check that the engine starts with all keys that are equipped on vehicle.
  2. 60 seconds after turning ignition switch from ON to ACC or OFF, or immediately after removing the key, check that the security indicator light is blinking.
23. Starting condition Start the engine and check that the engine starts smoothly.
24. Exhaust system Check that the exhaust noise is normal and no leaks are found.
25. Indicator and warning lights Check that all indicator lights and warning lights operate normally.
26. Heater & ventilation Check that the heater & ventilation system operates normally.
27. Air conditioner Check that the air conditioner operates normally.
28. Clock Check that the clock operates normally.
29. Audio Check the radio, CD player and AUX for normal operation.
30. Accessory power supply socket Check that each of the accessory power supply sockets operate normally.
31. Navigation system
  1. Check all display functions for normal operation.
  2. Check the map disc (DVD) are provided on vehicle.
  3. Check that the navigation system operates normally.
  4. Check that the rearview camera operates normally.
32. Rear entertainment system Check that the rear entertainment system operates normally.
33. Lighting system Check that the lighting system operates normally.
34. Wiper deicer Check that the wiper deicer operates normally.
35. Illumination control Check that the illumination control operates normally.
36. Window washer Check that the window washer system operates normally.
37. Wiper Check that the wiper system operates normally.
38. Power window Check that the power window operates normally.
39. Sunroof Check that the sunroof operates normally.
40. Door mirror Check that the remote control mirror operates normally.
41. Room mirror (RCD model)
  1. Check all display functions for normal operation.
  2. Check that the automatic anti-glare function operates normally.
  3. Check that the compass function operates normally.
  4. Check that the rearview camera operates normally.
42. Rear defogger Check that the rear defogger system operates normally.

Dynamic Test with the Vehicle Running 

Operation Check point
43. Brake test Check the foot brake for normal operations.
44. Parking brake Check the parking brake for normal operations.
45. AT shift control Check that the AT shift patterns are correct.
46. Cruise control Check that the cruise control system operates normally.

Checks after Dynamic Test 

Operation Check point
47. ATF level Check that the ATF level is correct.
48. Power steering fluid level Check that the power steering fluid level is normal.
49. Fluid leakage Check for fluid/oil leaks.
50. Water leakage Spray the vehicle with water and check for water leaks.
51. Appearance 2
  1. Remove the protective coat. (If equipped)
  2. Check the body paints for damage and stain.
  3. Check the plated parts for damage and rust.