LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2013 >> BRZ Premium, Automatic Trans >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Control System >> Power control system >> Data monitor/active test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data monitor/active test

  1. Data monitor list.
    1. Turn the ignition switch to OFF.
    2. Connect the SSM3 to the DLC3.
    3. Turn the ignition switch to ON.
    4. Follow the SSM3 display and select [Each System Check] →[Integ. unit mode] →[Current Data Display & Check] to bring up the data monitor item list.
    5. Use the data monitor to judge whether a component is working or not, and to narrow down the location of trouble.
      SSM3 SCREEN: [EACH SYSTEM CHECK] →[INTEG. UNIT MODE] →[CURRENT DATA DISPLAY & SAVE]

      Item name Description/display range Normal value Remarks (Main inspection items during a malfunction)
      [BATT voltage (control)]
      • Shows the BATT (control) voltage.
      • Display range: +0 - 21.4 V
      		 11 to 14 V When a malfunction occurs, it may be due to a problem with battery voltage.
      [BATT voltage (BACKUP)]
      • Shows the BATT voltage backup.
      • Display range: 0 - 21.4 V
      		 11 to 14 V When a malfunction occurs, it may be due to a problem with battery voltage.
      [ABS_CM Power Voltage]
      • Shows the IG power supply voltage.
      • Display range: 0 - 21.4 V
      		 11 to 14 V When a malfunction occurs, it may be due to a problem with the IG circuit.
      [ACC voltage]
      • Shows the ACC voltage.
      • Display range: 0 - 21.4 V
      		 11 to 14 V When a malfunction occurs, it may be due to a problem with the ACC circuit.
scientia non olet · About LEMON Manuals