Oxygen sensor (FA20): Installation

Installation of oxygen sensor
1. Install the oxygen sensor to the exhaust manifold.
  Standard value: T=21N.m {214kgf.cm} {15.5ft.lbf}
2. Connect the connector for oxygen sensor and the 2 clamps.
  
  Fig 1: Locating Oxygen Sensor Mounting Nut
  Courtesy of SUBARU OF AMERICA, INC.
Leak check of exhaust gas (Refer to COOLING SYSTEM (FA20) )
Installation of under cover front side RH
1. Using 3 clips, install the under cover front side RH.
Installation of under cover front AL (Refer to COOLING SYSTEM (FA20) )
Installation of front tire RH (Refer to REAR BRAKE )
Connection of the battery ground terminal
Standard value: T=6.0N.m {61kgf.cm} {4.4ft.lbf}