MT Gear Shift Lever: Removal

Disconnect the ground cable from battery.
Remove the gear shift knob.
Remove the console box. < Refer to REMOVAL , Console Box. >
Remove the console side panel and console front panel. < Refer to CONSOLE FRONT PANEL , REMOVAL, Center Console. >
Remove the clamp.

Fig 1: Identifying MT Gear Shift Lever Boot
Courtesy of SUBARU OF AMERICA, INC.
Remove the boot and insulator assembly.

Fig 2: Identifying Boot And Insulator Assembly
Courtesy of SUBARU OF AMERICA, INC.
Remove the harness clamp from the plate COMPL.

Fig 3: Identifying Plate COMPL Harness Clamp
Courtesy of SUBARU OF AMERICA, INC.
Remove the plate COMPL from the vehicle body.

Fig 4: Identifying Plate COMPL
Courtesy of SUBARU OF AMERICA, INC.
Lift up the vehicle.
Remove the rear exhaust pipe. < Refer to REMOVAL , Rear Exhaust Pipe. >
Remove the heat shield cover.

Fig 5: Identifying Heat Shield Cover
Courtesy of SUBARU OF AMERICA, INC.
Remove the stay from transmission bracket.

Fig 6: Identifying Stay And Transmission Bracket
Courtesy of SUBARU OF AMERICA, INC.
Remove the rod from joint.

Fig 7: Identifying Gear Shift Lever Stay And Rod
Courtesy of SUBARU OF AMERICA, INC.
Remove the cushion rubber from the vehicle body.

Fig 8: Identifying Cushion Rubber And Stay
Courtesy of SUBARU OF AMERICA, INC.
Extract the spring pin and remove the joint.

Fig 9: Identifying Gear Shift Lever Spring Pin And Joint
Courtesy of SUBARU OF AMERICA, INC.
Lower the vehicle.
Remove the gear shift lever.

Fig 10: Removing Gear Shift Lever
Courtesy of SUBARU OF AMERICA, INC.