LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2013 >> Outback Base, Automatic CVT Trans >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Keyless Entry Control Module >> Removal >> Wagon/Outback Model
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Wagon/Outback Model

  1. Disconnect the ground cable from battery.
  2. Remove the rear quarter trim LH. Refer to OUTBACK MODEL .
  3. Remove the keyless entry control module.
    1. Disconnect the connector.
    2. Remove the bolt and remove the keyless entry control module.
      Fig 1: Removing Keyless Entry Control Module
      G06653940Courtesy of SUBARU OF AMERICA, INC.