Check With SUBARU Select Monitor
- Connect the Subaru Select Monitor to data link connector.
- Run the "PC application for Subaru Select Monitor".
- On «Main Menu» display, select {Each System Check}.
- Select {Brake Control System}. When {VDC} is displayed, select the [OK] button.
- From {Current Data Display & Save}, select {FR Wheel Speed} and {FL Wheel Speed}.
- Check if the speed indicated on the display changes in the same manner as the speedometer reading during acceleration/deceleration when the steering wheel is in the straight-ahead position.
- If the speed indicated on the display does not change in the inspection, check the ABS wheel speed sensor. < Refer to CHECK ABS WHEEL SPEED SENSOR UNIT , INSPECTION, Front ABS Wheel Speed Sensor. >