April 5, 2026: LEMON Manuals is launched! Read the announcement.

Side Retainer

NOTE: After adjusting the backlash and tooth contact, replace the oil seal and O-ring of side retainer with new parts.

Using the ST, install the oil seal.
NOTE:
- Use a new oil seal.
- Apply differential gear oil to the oil seal lip and press-fitting surface.
- Oil seal has an identification mark (R, L). When installing oil seals, do not confuse the left and right.
ST 18675AA000 DIFFERENTIAL SIDE OIL SEAL INSTALLER

Fig 1: Installing Oil Seal Using Special Tool
Courtesy of SUBARU OF AMERICA, INC.
Install the O-ring.
NOTE:
- Use new O-rings.
- Apply the differential gear oil to O-ring.
  
  Fig 2: Identifying O-Ring
  Courtesy of SUBARU OF AMERICA, INC.