| Circuit tester |
Used for measuring resistance and voltage. |
| Thickness gauge |
Used for measuring the clearance in reverse brake, forward clutch and transfer clutch. |
| Caliper |
Used for measuring the dimension. |
| Spring scale |
Used for measuring the starting torque of the drive pinion. |
| TORX® bit T70 |
Used for removing and installing differential gear oil drain plug. |
| Straight pin remover |
Used for removing and installing the straight pin. |
| Push/pull gauge |
Used for measuring clutch clearance. |
| Chain sling |
Used for removing and installing transmission.
- Length: 0.8 - 1 m (2.6 - 3.3 ft)
- Load capacity: 1.2 t (2, 646 lb) or more
- Diameter: 6 mm (0.24 in) or 6.3 mm (0.25 in)
- Chain external width: 23.5 mm (0.93 in) or less
- Chain internal width: 8.5 mm (0.33 in) or more
|
| Screw shackle |
Used for removing and installing transmission.
- Load capacity: 250 kg (551 lb) or more
- Use two pieces.
|