LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2013 >> Outback Base, Standard Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H4DO) >> Engine Control Module (ECM) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Control Module (ECM): Removal

  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G08579605Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the back panel - pocket. Refer to REMOVAL .
  3. Disconnect the connector from ECM.
    Fig 2: Locating ECM Connectors
    G08579740Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the nuts to remove the ECM.
    Fig 3: Locating ECM Nuts
    G08579741Courtesy of SUBARU OF AMERICA, INC.