LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2013 >> Outback Base, Standard Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Diagnostics) (H4DO) >> Drive Cycle >> Procedure >> Drive Cycle B >> Diagnostic procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic procedure

  1. Drive at 10 km/h (6 MPH) or more.
  2. Stop the vehicle and idle for ten minutes.
  3. Read the temporary code using the Subaru Select Monitor or general scan tool. Refer to OPERATION .