Steering Wheel: Installation
WARNING:
Always refer to
"Airbag System" before performing service on the airbag modules. < Refer to
CAUTION
, General Description. >
- Align the center position of the roll connector. < Refer to ADJUSTMENT , Roll Connector. >
- Install each part in the reverse order of removal.NOTE: Align the alignment marks on the steering wheel and steering shaft.
Tightening torque:
Steering wheel: 39 N.m (4.0 kgf-m, 28.8 ft-lb)
Clearance:
Between column cover and steering wheel: 4 - 6 mm (0.16 - 0.24 in)