Removal & Installation
WARNING: This page is about the Outback Base, Automatic CVT Trans, which is a different variant/trim than selected.
4 SPEED TRANS
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| | 4.4 | 3.3 | C |
| Combination Procedure: CONVERTER BUSHING: Remove & Replace: |
| | 0.7 | | B |
| Combination Procedure: CONVERTER DRIVE PLATE: Remove & Replace: |
| | 0.3 | | C |
| Combination Procedure: CONVERTER SEAL: Remove & Replace: |
| | 0.3 | | B |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.3 | | C |
| Combination Procedure: OIL PUMP: Remove & Replace: |
| | 1.0 | | B |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: |
| | 0.6 | | C |
CVT TRANS
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| 2.5L Eng | | 5.3 | | C |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.3 | | C |
| Combination Procedure: PARKING PAWL ASSEMBLY: Remove & Replace: |
| | 0.8 | | A |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: |
| | 0.6 | | C |