Intake Manifold: Assembly

Liquid gasket: 

THREE BOND 1105 (Part No. 004403010) or equivalent 

Tightening torque: 

17 N.m (1.7 kgf-m, 12.5 ft-lb) 

1. Install the purge control solenoid valve. Refer to INSTALLATION .
2. Install the manifold absolute pressure sensor. Refer to INSTALLATION .
3. Install the EGR valve. Refer to INSTALLATION .
4. Install the fuel pipe assembly.

   Tightening torque: 

   6.4 N.m (0.7 kgf-m, 4.7 ft-lb) 

   Fig 1: Locating Fuel Pipe Assembly Mounting Bolts

   Courtesy of SUBARU OF AMERICA, INC.
   Fig 2: Locating Fuel Pipe Assembly Mounting Bolts

   Courtesy of SUBARU OF AMERICA, INC.
5. Install the fuel injector pipe and the fuel hose.

   Tightening torque: 

   1.25 N.m (0.1 kgf-m, 0.9 ft-lb) 

   Fig 3: Locating Fuel Injector Pipe Mounting Clamps

   Courtesy of SUBARU OF AMERICA, INC.
   Fig 4: Locating Fuel Hose Mounting Clamps

   Courtesy of SUBARU OF AMERICA, INC.
6. Install the engine harness to the intake manifold. Refer to ENGINE HARNESS .