Fuel Pump Circuit
CAUTION:
After servicing or replacing faulty parts, perform Clear Memory Mode and Inspection Mode. Refer to
OPERATION and
PROCEDURE .
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK OPERATING SOUND OF FUEL PUMP. Make sure that the fuel pump operates for two seconds when turning the ignition switch to ON.
NOTE:
Fuel pump operation can be executed using the Subaru Select Monitor. For detailed procedures, refer to SYSTEM OPERATION CHECK MODE . |
Does the fuel pump emit operating sound? | Check the fuel injector circuit. Refer to FUEL INJECTOR CIRCUIT . | Display the DTC. Refer to OPERATION . |