LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2013 >> Outback R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> Reduction Driven Gear >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Reduction Driven Gear: Installation

  1. Set the range select lever to the "P" range.
  2. Use a plastic hammer to install reduction driven gear assembly.
  3. Select the reduction gear shims. Refer to ADJUSTMENT .
  4. Join the transmission case and the extension case, and then install the rear vehicle speed sensor. Refer to INSTALLATION .
  5. Install the transmission assembly to the vehicle. Refer to INSTALLATION .
scientia non olet · About LEMON Manuals