| AT select lever |
Starter does not run. |
Adjust the select cable and inhibitor switch, or inspect the circuit. |
| Back-up light does not illuminate. |
Adjust the select cable and inhibitor switch, or inspect the circuit. |
| AT shift lock system does not operate normally. |
Adjust the select cable and inhibitor switch, or inspect the circuit. |
| Manual mode can not be set. |
Inspect the mode switch and select lever, or inspect the circuit. |
| Up-shift is not engaged at manual mode. |
Check the shift-up switch and circuit. |
| Down-shift is not engaged at manual mode. |
Check the shift-down switch and circuit. |
| MT gear shift lever (6MT) |
Cannot shift into reverse. |
Adjust the MT gear select cable. |
| Shifted to 6th though it shifted to reverse. |
Adjust or replace the MT gear select cable. |
| Can shift into reverse when the slider is not pulled up. |
Adjust or replace the MT gear select cable. |
| Slider cannot be pulled up or sticks in the pulled-up position. |
- Check the shift link system of the transmission.
- Replace the MT gear shift lever.
|