Fuel Pump Control (Off Operation)
CAUTION:
After executing the system operation check mode, execute the Clear Memory Mode. Refer to
OPERATION , Clear Memory Mode.
- On «System Operation Check Mode» display, select {Fuel Pump Control}.
- On «Fuel Pump Control» display, select {OFF Drive}.
- On «Start the Engine» display, start the engine and click the [OK] button.
- On «OFF Drive» display, click the [Execution] button and execute the OFF drive.
- Click the [Cancel] button to stop the OFF drive.
- Click the [F12Exit] button to end the OFF drive. The screen will return to the «Fuel Pump Control» screen.NOTE: For detailed operation procedures, refer to "Subaru Select Monitor".