Injector Control (Injection Stop Mode)
CAUTION:
After executing the system operation check mode, execute the Clear Memory Mode. Refer to
OPERATION , Clear Memory Mode.
- On «System Operation Check Mode» display, select {Injector Control}.
- On «Injector Control» display, select {Injection Stop Mode}.
- On «Injection Stop Mode» display, select the fuel injector to be stopped.
- On «Start the Engine» display, start the engine and click the [OK] button.
- On «Fuel Injector #» display, click the [Execution] button and execute the injection stop mode.
- Click the [Cancel] button to stop the injection stop mode.
- Click the [F12Exit] button to return the «Injection Stop Mode» display screen.
- On «Injection Stop Mode» display, click the [Return] button to end the «Injection Stop Mode». The screen will return to the «Injector Control» screen.
NOTE:
For detailed operation procedures, refer to
" Subaru Select Monitor".