LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2013 >> Tribeca >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> General Description >> Preparation Tool >> Special Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Special Tool

ILLUSTRATION TOOL NUMBER DESCRIPTION REMARKS
G05002425
 498575400 OIL PRESSURE GAUGE ASSY Used for measuring oil pressure.
G05002426
 498897200 OIL PRESSURE ADAPTER Used together with oil pump cover installed on when measuring line pressure.
G06342807
 498897800 OIL PRESSURE ADAPTER SET Used for measuring the transfer clutch pressure.
G04997553
 498277200 STOPPER SET
  • Used for removing and installing the automatic transmission assembly.
  • Used for preventing the torque converter from dropping off.
G05002431
 398527700 PULLER ASSY
  • Used for removing the extension oil seal.
  • Used for removing the front differential side retainer bearing outer race.
G05002432
 498057300 INSTALLER Used for installing the extension oil seal.
G05002433
 498077000 REMOVER
  • Used for removing the front differential taper roller bearing.
  • Used for installing the center differential ball bearing.
G06651903
 18658AA020 WRENCH COMPL RETAINER
  • Used for removing and installing the differential side retainer.
  • WRENCH COMPL RETAINER (18630AA010) can also be used.
G04990233
 398487700 DRIFT Used for installing the front differential taper roller bearing.
G05002439
 498255400 PLATE Used for measuring the backlash of hypoid gear.
G05002441
 498247001 MAGNET BASE
  • Used for measuring the gear backlash.
  • Used together with DIAL GAUGE (498247100).
G05002442
 498247100 DIAL GAUGE
  • Used for measuring the gear backlash.
  • Used together with MAGNET BASE (498247001).
G05002443
 498517000 REPLACER Used for removing the drive pinion shaft front roller bearing.
G05002446
 499787700 WRENCH
  • Used for removing and installing the drive pinion shaft lock nut.
  • Used for adjusting the front differential hypoid gear backlash.
G05002448
 398643600 GAUGE Used for measuring total end play, extension end play and drive pinion height.
G05002451
 398744300 PISTON GUIDE Used for measuring height from mating surface of the main case to pressure plate.
G05002453
 499737100 PULLER SET
  • Used for removing the reduction driven gear assembly.
  • Used together with GEAR HOLDER (18680AA010) and SUPPORT PULLER (18766AA000).
G05002454
 498077600 REMOVER Used for removing the center differential ball bearing.
G05022160
 18667AA010 HOLDER
  • Used for removing and installing the drive pinion lock nut.
  • Used as a handle to rotate gear when checking tooth contact.
  • Used for adjusting preload on the front differential side bearing.
G07910019
 1B022XU0 SUBARU SELECT MONITOR III KIT Used for troubleshooting the electrical system.
G05002460
 18675AA000 DIFFERENTIAL SIDE OIL SEAL INSTALLER Used for installing the differential side retainer oil seal.
G05003214
 18654AA000 INSTALLER Used for installing the reduction driven gear ball bearing.
G05002461
 28399SA010 OIL SEAL PROTECTOR Used for protecting oil seal when installing front drive shaft.
G05022166
 18763AA000 COMPRESSOR SHAFT Used for disassembling and assembling front brake clutch and reverse brake clutch.
G05022167
 18765AA000 COMPRESSOR SUPPORT Used for disassembling and assembling front brake clutch and reverse brake clutch.
G05022168
 18676AA020 TORX® WRENCH Used for removing and installing the torque converter case.
G05022169
 18854AA000 ANGLE GAUGE Used for tightening parking support.
G04997556
 498497100 CRANKSHAFT STOPPER Used for stopping the drive plate rotation when removing and installing the drive plate.
G05002916
 498077300 REMOVER Used for removing ball bearing of reduction driven gear.
G04997567
 499587100 OIL SEAL INSTALLER Used for installing the converter case oil seal.
G05002447
 499787500 ADAPTER
  • Used for installing and removing drive pinion shaft lock nut.
  • Used for adjusting preload on the front differential side bearing.
G05022173
 499575400 GAUGE Used for adjusting the total end play (selecting the reduction driven gear shim).
G05022174
 18762AA000 COMPRESSOR SPECIAL TOOL
  • Used for disassembling and assembling front brake clutch and reverse brake clutch.
  • Used together with COMPRESSOR SHAFT (18763AA000) and COMPRESSOR SUPPORT (18765AA000).
G05022175
 499755602 PRESS Used for installing the parking gear.
G05022176
 18680AA010 GEAR HOLDER Used for removing the reduction driven gear assembly. (2-piece set)
G05022177
 18766AA000 SUPPORT PULLER Used for removing the reduction driven gear assembly.
G05022178
 18767AA000 REMOVER Used for removing the parking gear.
G04994502
 41099AA010 ENGINE SUPPORT BRACKET Used for supporting engine.
G04994503
 41099AA020 ENGINE SUPPORT Used for supporting engine.
scientia non olet · About LEMON Manuals