Fuel Pump Control Computer (FA20): Installation
- Fuel pump control computer assembly installation
- Engage the bracket of fuel pump control computer assembly to the body mounting hole and pass the stud bolt through the body hole.
- Install the fuel pump control computer assembly with the nut.
Standard value: T=5.0N.m {51kgf.cm} {3.7ft.lbf}
CAUTION: If impact is applied to the fuel pump control computer assembly, do not reuse it. - Connect the fuel pump control computer connector.
- Installation of luggage compartment trim side cover RH (Refer to INSTALLATION )
- Installation of luggage compartment trim cover INN RH (Refer to INSTALLATION )
- Separate type rear seat cushion assembly installation (Refer to INSTALLATION )
- Front door scuff plate RH installation (Refer to INSTALLATION )
- Installation of front door opening trim weather strip RH (Refer to POWER WINDOW SYSTEM )
- Battery ground terminal installation
Standard value: T=6.0N.m {61kgf.cm} {4.4ft.lbf}