Front ABS Wheel Speed Sensor: Installation
CAUTION:
- Be careful not to damage the sensor.
- Do not apply excessive force to the sensor harness.
Install each part in the reverse order of removal.
NOTE:
- Check the identification (mark) on the harness to make sure there is no warpage. < Refer to SPECIFICATION , General Description. >
- Check if the harness is not pulled and does not come in contact with the suspension or body while operating the steering.
Tightening torque:
Front ABS wheel speed sensor: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)
Front wheel: 120 N.m (12.24 kgf-m, 88.5 ft-lb)