LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2014 >> Outback 2.5i, Standard Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamics Control System >> VDC Sequence Control >> Operation >> VDC Sequence Control With SUBARU Select Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

VDC Sequence Control With SUBARU Select Monitor

NOTE: In the event of any trouble, sequence control will not operate.
  1. Connect the Subaru Select Monitor to data link connector.
    1. Run the "PC application for Subaru Select Monitor".
    2. On «Main Menu» display, select {Each System Check}.
    3. Select {Brake Control System}. When {VDC} is displayed, select the [OK] button.
    4. Select the {VDC Function Check Mode} from {Function Check Sequence}.
  2. Operate according to the procedures displayed in the Subaru Select Monitor.
  3. The brake system being operated is displayed on the Subaru Select Monitor.
scientia non olet · About LEMON Manuals