RH Side

Install in the reverse order of removal.

NOTE: Use new O-rings, injection rubbers, and seal rings.

Tightening torque:

19 N.m (1.9 kgf-m, 14.0 ft-lb)

Fig 1: Locating Fuel Injector Pipe To Cylinder Head Mounting Bolts (RH)

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

19 N.m (1.9 kgf-m, 14.0 ft-lb)

Fig 2: Locating Fuel Pipe Protector Bolts (RH)

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

13 N.m (1.3 kgf-m, 9.6 ft-lb)

Fig 3: Locating Feed Hose To Fuel Pipe Protector RH Bolt

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

Clamp (A), (B)

3 N.m (0.3 kgf-m, 2.2 ft-lb)

Bolt (C)

6.5 N.m (0.7 kgf-m, 4.8 ft-lb)

Fig 4: Identifying Air Intake Chamber Clamps And Bolt

Courtesy of SUBARU OF AMERICA, INC.