LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2014 >> Tribeca >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System >> Fuel Injector >> Removal >> LH Side
April 5, 2026: LEMON Manuals is launched! Read the announcement.

LH Side

  1. Remove the collector cover.
  2. Release the fuel pressure. < Ref. to RELEASING OF FUEL PRESSURE , PROCEDURE, Fuel. >
  3. Remove the battery and battery carrier. < Ref. to REMOVAL , Battery. >
  4. Open the fuel filler lid and remove the fuel filler cap.
  5. Remove the securing clips from the two locations on the fuel pipe protector LH.
    Fig 1: Locating Fuel Pipe Protector Clips
    G07924386Courtesy of SUBARU OF AMERICA, INC.
  6. Disconnect the PCV hose.
    Fig 2: Locating PCV Hose Clamp
    G08543852Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the fuel pipe protector LH.
    Fig 3: Locating Fuel Pipe Protector Bolts (LH)
    G07924394Courtesy of SUBARU OF AMERICA, INC.
  8. Disconnect the connector from fuel injector.
  9. Remove the bolt which holds fuel injector pipe onto cylinder head.
    Fig 4: Locating Fuel Injector Pipe LH To Cylinder Head Mounting Bolts
    G07924396Courtesy of SUBARU OF AMERICA, INC.
  10. Remove the fuel injector while lifting up the fuel injector pipe.