RH Side

Remove the collector cover.
Release the fuel pressure. < Ref. to RELEASING OF FUEL PRESSURE , PROCEDURE, Fuel. >
Disconnect the ground cable from battery.
Open the fuel filler lid and remove the fuel filler cap.
Disconnect the brake booster vacuum hose from the intake manifold.

Fig 1: Identifying Brake Booster Vacuum Hose
Courtesy of SUBARU OF AMERICA, INC.
Loosen the clamp (A) which connects air intake chamber to throttle body.
Loosen the clamp (B) which connects intake boot to air intake chamber.
Remove the bolt (C) which secures air intake chamber and collector cover bracket to the stay.

Fig 2: Identifying Air Intake Chamber Clamps And Bolt
Courtesy of SUBARU OF AMERICA, INC.
Remove the air intake chamber, and move it to the left side wheel apron.

Fig 3: Identifying Air Intake Chamber
Courtesy of SUBARU OF AMERICA, INC.
Remove the air cleaner case and intake boot. < Ref. to REMOVAL , Air Cleaner Case. >
Remove the feed hose from the fuel pipe protector RH.

Fig 4: Locating Fuel Pipe Protector Mounting Bolt (RH)
Courtesy of SUBARU OF AMERICA, INC.
Remove the fuel pipe protector RH.

Fig 5: Locating Fuel Pipe Protector Bolts (RH)
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector from fuel injector.
Remove the bolt which holds fuel injector pipe onto cylinder head.

Fig 6: Locating Fuel Injector Pipe To Cylinder Head Mounting Bolts (RH)
Courtesy of SUBARU OF AMERICA, INC.
Remove the fuel injector while lifting up the fuel injector pipe.