LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2014 >> Tribeca >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System >> Fuel >> Procedure >> Draining Fuel (With SUBARU Select Monitor)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Draining Fuel (With SUBARU Select Monitor)

WARNING: Place "NO OPEN FLAMES" signs near the working area.
CAUTION: Be careful not to spill fuel.
NOTE:
  • If the fuel pump cannot be driven, refer to the procedures for draining from the fuel filler hose. < Ref. to DRAINING FUEL (THROUGH THE FUEL FILLER HOSE) , PROCEDURE, Fuel. >
  • Be careful not to let the battery run-out.
  1. Release the fuel pressure. < Ref. to RELEASING OF FUEL PRESSURE , PROCEDURE, Fuel. >
  2. Remove the collector cover.
  3. Disconnect the fuel delivery hose by pushing the ST in the direction of the arrow.

    ST 42099AE000 QUICK CONNECTOR RELEASE

    CAUTION:
    • Be careful not to spill fuel.
    • Catch the fuel from hoses using a container or cloth.
    Fig 1: Disconnecting Fuel Delivery Hose Using Special Tool
    G07924523Courtesy of SUBARU OF AMERICA, INC.
  4. Connect ST to the fuel delivery hose.

    ST 18471AA000 FUEL PIPE ADAPTER

  5. Connect the gasoline proof hose to ST and put the end of the hose in the container.
  6. Drive the fuel pump and drain the fuel using Subaru Select Monitor. (Refer to "Subaru Select Monitor" operating information.)
    CAUTION: Be careful not to spill fuel.
  7. Install the related parts in the reverse order after draining the fuel.