Intake Manifold: Assembly

Liquid gasket: 

THREE BOND 1105 (Part No. 004403010) or equivalent 

Tightening torque: 

17 N.m (1.7 kgf-m, 12.5 ft-lb) 

1. Install the purge control solenoid valve. < Ref. to INSTALLATION , Purge Control Solenoid Valve. >
2. Install the manifold absolute pressure sensor. < Ref. to INSTALLATION , Manifold Absolute Pressure Sensor. >
3. Install the EGR valve. < Ref. to INSTALLATION , EGR Valve. >
4. Install the fuel pipe assembly.

   Tightening torque: 

   6.4 N.m (0.7 kgf-m, 4.7 ft-lb) 

   Fig 1: Locating Fuel Pipe Assembly Mounting Bolts (1 Of 2)

   Courtesy of SUBARU OF AMERICA, INC.
   Fig 2: Locating Fuel Pipe Assembly Mounting Bolts (2 Of 2)

   Courtesy of SUBARU OF AMERICA, INC.
5. Install the fuel injector pipe and the fuel hose.
   NOTE: Use a new fuel hose.

   Tightening torque: 

   1.25 N.m (0.1 kgf-m, 0.9 ft-lb) 

   Fig 3: Locating Fuel Hose Mounting Clamps (1 Of 2)

   Courtesy of SUBARU OF AMERICA, INC.
   Fig 4: Locating Fuel Hose Mounting Clamps (2 Of 2)

   Courtesy of SUBARU OF AMERICA, INC.
6. Install the engine harness to the intake manifold. < Ref. to ENGINE HARNESS , COMPONENT, General Description. >