LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2014 >> Tribeca >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Injection System >> Knock Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Knock Sensor: Installation

  1. Install the knock sensor to the cylinder block.

    Tightening torque: 

    25 N.m (2.5 kgf-m, 18.4 ft-lb) 

    NOTE: For the knock sensor installation angle, refer to the figure below.
    Fig 1: Identifying Knock Sensor Installation Angle
    G07912320Courtesy of SUBARU OF AMERICA, INC.
  2. Connect the knock sensor connector.
  3. Install the intake manifold. < Ref. to INSTALLATION , Intake Manifold. >
  4. Connect the battery ground terminal.
  5. Install the collector cover.
scientia non olet · About LEMON Manuals