SUBARU Select Monitor (Normal Mode)

On the «Main Menu», select {Each System Check}.
On the «System Selection Menu», select {Engine Control System}.
Select [OK] after the information of engine type has been displayed.
On the «Engine Diagnosis» display screen, select {Clear Memory}.
When the "Clear Memory?" is shown on the screen, click the [Yes] button.
When "Done" and "Turn ignition switch to OFF" are shown on the display screen, turn the ignition switch to OFF.

NOTE:

Initial diagnosis of electronic throttle control is performed after memory clearance. Therefore, start the engine after 10 seconds or more have passed since turning the ignition switch to ON.
For detailed operation procedure, refer to " Subaru Select Monitor".