SUBARU Select Monitor (Normal Mode)

On the «Main Menu», select {Each System Check}.
On the «System Selection Menu», select {Engine Control System}.
Click the [OK] key after the information regarding engine type has been displayed.
On the «Engine Diagnosis» display screen, select {Diagnostic Code(s) Display}.
On the «Diagnostic Trouble Code» screen, select {Temporary Diagnostic Code(s)} or {Memorized Diagnostic Code(s)}.

NOTE:

For detailed operation procedure, refer to the " Subaru Select Monitor".
For details concerning DTC, refer to "List of Diagnostic Trouble Code (DTC)". Refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC)