Air Cleaner Element: Replacement

Disconnect the ground cable from battery.
Disconnect the connector from mass air flow sensor.
Remove the clips (A) on air cleaner case.

Fig 1: Identifying Air Cleaner Case Clips
Courtesy of SUBARU OF AMERICA, INC.
While pushing the duct toward the back end of the vehicle, remove the air cleaner element.

Fig 2: Removing Air Cleaner Element
Courtesy of SUBARU OF AMERICA, INC.
Check that there are no foreign objects in the clean side.
Install in the reverse order of removal.
CAUTION:
When replacing the air cleaner element, use SUBARU Genuine air cleaner element according to the engine type. Using other air cleaner element may affect engine performance.

NOTE:
Fasten with a clip after inserting the lower tab of case.

Fig 3: Installing Air Cleaner Element
Courtesy of SUBARU OF AMERICA, INC.