LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2014 >> Tribeca >> Repair and Diagnosis >> Maintenance >> Procedures >> General Information >> Steering System (Power Steering) >> Inspection >> Power Steering Fluid Level
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Steering Fluid Level

NOTE:
  • At power steering fluid temperature 20°C (68°F); read the fluid level on the "COLD" side.
  • At power steering fluid temperature 80°C (176°F); read the fluid level on the "HOT" side.
  1. Place the vehicle with engine "OFF" on a level surface.
  2. Check the fluid level using the scale on the outside of the reservoir tank. If the level is below "MIN", fill fluid up to "MAX" level.
    Fig 1: Identifying Power Steering Fluid Reservoir Tank Max And Min Level
    G06341753Courtesy of SUBARU OF AMERICA, INC.
    NOTE:

    If fluid level is at MAX level or above, drain fluid to keep the level in the specified range of indicator by using a syringe or the like.

    Recommended fluid: 

    Refer to "Recommended Materials" service information. < Refer to  FLUID  , RECOMMENDED MATERIALS, Recommended Materials. > 

    Fluid capacity: 

    Refer to the "SPC" service information. < Refer to  CAPACITY  , TRIBECA. >