LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2014 >> Tribeca >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> Front Vehicle Speed Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Vehicle Speed Sensor: Removal

  1. Remove the transmission assembly from the vehicle. < Ref. to REMOVAL , Automatic Transmission Assembly. >
  2. Disconnect the rear vehicle speed sensor connector.
    NOTE: Secure the transmission harness to the transmission body using wire etc.
    Fig 1: Identifying Rear Vehicle Speed Sensor Connector
    G08545059Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the extension case.
    Fig 2: Identifying Extension Case Mounting Bolts
    G08545060Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the center differential carrier. < Ref. to REMOVAL , Center Differential Carrier. >
  5. Lay along the transmission case, and then remove the oil pan.
  6. Remove the old gasket on the oil pan and transmission case completely.
  7. Disconnect the front vehicle speed sensor connector.
    Fig 3: Identifying Front Vehicle Speed Sensor Connector
    G05668774Courtesy of SUBARU OF AMERICA, INC.
  8. Remove the front vehicle speed sensor securing bolt.
    Fig 4: Identifying Front Vehicle Speed Sensor And Mounting Bolts
    G06652002Courtesy of SUBARU OF AMERICA, INC.
  9. Remove the front vehicle speed sensor through the hole of AT transmission main case.
scientia non olet · About LEMON Manuals