LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> Outback 2.5i Limited >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H4DO) >> Intake Manifold Assembly >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Intake Manifold Assembly: Disassembly

  1. Remove the throttle body. <Ref. to REMOVAL , Throttle Body.>
  2. Remove the EGR pipe. <Ref. to REMOVAL , EGR Pipe.>
  3. Remove the EGR control valve. <Ref. to REMOVAL , EGR Control Valve.>
  4. Remove the purge control solenoid valve. <Ref. to REMOVAL , Purge Control Solenoid Valve.>
  5. Remove the manifold absolute pressure sensor. <Ref. to REMOVAL , Manifold Absolute Pressure Sensor.>
  6. Remove the fuel delivery pipe assembly from the intake manifold assembly.
    NOTE: Disconnect the quick connector as shown in the figure.
    Fig 1: Disconnecting Quick Connector
    G10262142Courtesy of SUBARU OF AMERICA, INC.
    Fig 2: Locating Manifold Absolute Pressure Sensor
    G10262143Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the fuel pipe assembly from the intake manifold assembly.
    Fig 3: Locating Fuel Pipe Assembly
    G10262144Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals