LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> Outback 2.5i >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Keyless Access Control Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Keyless Access Control Module: Installation

NOTE: Make sure that there are no differences from the contents of the current settings after installation. <Ref. to LIST , Read Current Data.>
  1. Install the reinforcement - combination meter and keyless access control module.
    NOTE: For model with navigation, install the GPS antenna assembly. <Ref. to INSTALLATION , GPS Antenna.>

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb) 

  2. Install the combination meter assembly. <Ref. to INSTALLATION , Combination Meter.>
  3. Connect the ground terminal to battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
scientia non olet · About LEMON Manuals