LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> Outback 2.5i >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Keyless Access Control Module >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Keyless Access Control Module: Removal

  1. Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
  2. Remove the combination meter assembly. <Ref. to REMOVAL , Combination Meter.>
  3. Remove the keyless access control module.
    1. Remove the reinforcement - combination meter.
      NOTE: For model with navigation, remove the GPS antenna assembly. <Ref. to REMOVAL , GPS Antenna.>
    2. Disconnect the connector and remove the bolt.
      Fig 1: Locating Keyless Access Control Module Bolts
      G10272999Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals